The Apache + SSL HOWTO

Version 1.6.7 (changelog: view source)

Spanish translation maintained by Sergio Artigas

French translation maintained by Jean-Francois Moreau

Revised September 26, 2002 by Matt Raible for Apache 2.0.42. Original Article at http://tud.at/programm/apache-ssl-win32-howto.php3.

Overview

This page describes the installation of the Win32 version of Apache with the mod_ssl extension. The newest version should always be available from http://tud.at/programm/apache-ssl-win32-howto.php3.

This process worked for many people on Windows NT, 98, ME, 2000 and XP; please mail me your suggestions and bug reports. You can even install Apache with SSL in addition to the Microsoft Internet Information Server if you need to.

Note: sometimes, there are changes between the precompiled apache distributions so that this HOWTO is not correct anymore. In this case, if the current version does not work for you, download an older version - one that was published before the modification date of this HOWTO. Or, if you like adventures, try to make it run, and mail me if you needed to change anything.

Apache with mod_ssl seems to be the only free (as in speech, not in beer) solution for Win32. Please note that Apache on Win32 is considered beta quality as it doesn't reach the stability and performance of Apache on Un*x platforms.

1.: Installing Apache

Get the Win32 version of the Apache web server from one of the mirrors. It is called something like

apache_x_y_z_win32.exe. This is a self-extracting archive that contains the Apache base system and sample configuration files.

Don't mix Apache versions 1.3 and 2! It won't work. If you find 1.3.x on modssl.org, you cannot expect it to work with 2.0.x.

Install Apache as described in http://www.apache.org/docs/windows.html.

Note: You can skip this step and get a full Apache+SSL distribution from modssl.org, as described below. There will be no fancy installation program but you won't need to overwrite the stock Apache files. This is the better way if you are experienced and don't fear editing configuration files (which you will need to do anyway).

Change at least the following parameters in Apache-dir/conf/httpd.conf:
[Replace all occurences of www.my-server.dom with the real domain name!]

• Port 80 to # Port 80 (Comment it out;

  Port is not necessary, Listen overrides it later.)

• (if not in addition to IIS) Listen 80
• ServerName www.my-server.dom
• (if in addition to IIS) DocumentRoot and the corresponding <Directory some-dir> to your Inetpub\wwwroot

Install the Apache service (NT only) and start the server. Verify that everything works before proceeding to the SSL installation because this limits the possible errors.

Try http://www.my-server.dom:443/. It won't be encrypted yet but if this works then the port configuration (port 443) is right.

2.: Getting OpenSSL and mod_ssl

You will have two choices:

• compile the mod_ssl.so module from the latest sources, available at http://www.modssl.org/contrib/ftp/source/ for Apache 1.3.x and included in Apache HTTP server sources, accesible as a CVS code repository (see the instructions at http://httpd.apache.org/dev/anoncvs.txt) for Apache 2.0.x.
• for Windows, get it already compiled from http://hunter.campbus.com/ (you will find there Apache 1.3 and 2.0 binaries with the corresponding mod_ssl.so module versions included), and binaries for Linux are included in the major Linux distributions.

Apache Software Foundation mades a point in not offering the compiled binaries for the SSL module, due to the export regulations for cryptographic software from USA. Don't ask for binaries if they will not be available at the currently indicated locations. Various ISVs provide free binaries in various projects such as NuSphere Technology Platform, Apache-SSL etc.

OpenSSL is required for getting a certificate to use with your web server. You may download its sources and compile it from http://www.openssl.org/source/. Compiled binaries are available at http://gnuwin32.sourceforge.net/packages/openssl.htm for Windows and are included in major Linux distributions.

OpenSSL for Windows might also be obtained by downloading and installing Cygwin from http://www.cygwin.com.

Put the files ssleay32.dll and libeay32.dll from the Apache/modssl distribution directory to WINNT\System32 (or in another folder mentioned in the PATH environment variable). This is important! About 70 % of the e-mails I receive is because people forget to do this.

3.: Creating a test certificate

The following instructions are adapted from http://www.apache-ssl.org/#FAQ.

Open a shell window (Command Prompt in Windows) and change the current directory to the directory where you have the openssl.exe file (openssl file for Linux).

openssl req -config openssl.cnf -new -out server.csr
This creates a certificate signing request (server.csr) and a private key (privkey.pem), using the configuration file that is provided with the binary distribution of OpenSSL or with Cygwin (openssl.cnf) that will make the OpenSSL application to prompt for each detail of the certificate. When asked for "Common Name (eg, your websites domain name)", give the exact domain name of your web server (e.g. www.my-server.dom). The certificate belongs to this server name and browsers complain if the name doesn't match.

If you didn't provide a config file, OpenSSL will try to use the file specified by the OPENSSL_CONF environment variable. This variable is usually not defined and if you follow the instructions from the original tutorial (linked at the top of this page), which does not use the -conf switch, you will get an error about "distinguished name". (Thanks to Olivier Gambier for clearing this problem, using information from http://www.openssl.org/docs/apps/req.html.)

On a Windows system, files with cnf extensions are treated as special files (of type SpeedDial) and Windows Explorer will refuse to display its extension, regardless of display settings, and the file will have a strongly modified context menu that might prevent you from editing it and might mislead you to believe you don't have this file. Just look for a SpeedDial-type file displayed simply openssl.

openssl rsa -in privkey.pem -out server.key
This removes the passphrase from the private key. You MUST understand what this means; server.key should be only readable by the Apache server and the administrator.
You should delete the .rnd file because it contains the entropy information for creating the key and could be used for cryptographic attacks against your private key.

openssl x509 -in server.csr -out server.crt -req -signkey server.key -days 365
This creates a self-signed certificate that you can use until you get a "real" one from a certificate authority. (Which is optional; if you know your users, you can tell them to install the certificate into their browsers.) Note that this certificate expires after one year, you can increase -days 365 if you don't want this.

If you have users with MS Internet Explorer 4.0+ and want them to be able to install the certificate into their certificate storage (by downloading and opening it), you need to create a DER-encoded version of the certificate:
openssl x509 -in server.crt -out server.der.crt -outform DER

Create an Apache/conf/ssl directory and move server.key and server.crt into it. For Linux create two directories: ssl.key and ssl.crt. Move server.crt into ssl.crt and move server.key into ssl.key.

4.: Configuring Apache and mod_ssl

Copy the executable files (*.exe, *.dll, *.so) from the downloaded apache-mod_ssl distribution over your original Apache installation directory (remember to stop Apache first and DO NOT overwrite your edited config files etc.!).

Find the LoadModule directives in your httpd.conf file and add this after the existing ones, according to the file you have found in the distribution:

LoadModule ssl_module modules/ApacheModuleSSL.dll
or
LoadModule ssl_module modules/ApacheModuleSSL.so
or
LoadModule ssl_module modules/mod_ssl.so
in newer versions. (Use this for 2.0.42 on Windows, on Linux, this will be done for you when you compile with --enable-ssh=shared)

In newer versions of the distribution for Apache 1.x, it could also be necessary to add
AddModule mod_ssl.c
after the AddModule lines that are already in the config file.

Copy ssl.conf from the OpenSSL distribution to Apache/conf/. For Windows, you can download from http://www.raibledesigns.com/tomcat/ssl.conf (Right click -> Save Target As...). Make sure and change the DocumentRoot and ServerName values on lines 93 and 94.

Add the following to the end of httpd.conf:

# see http://www.modssl.org/docs/2.4/ssl_reference.html for more info
SSLMutex sem
SSLRandomSeed startup builtin
SSLSessionCache none

ErrorLog logs/ssl.log
LogLevel info
# You can later change "info" to "warn" if everything is OK

<VirtualHost www.my-server.dom:443>
SSLEngine On
SSLCertificateFile conf/ssl/server.crt
SSLCertificateKeyFile conf/ssl/server.key
</VirtualHost>

Don't forget to call apache with -D SSL if the IfDefine directive is active in the config file! In other words, either start Apache from the command line with -D SSL or comment out the IfDefine start/end tags in ssl.conf.

You might need to use regedit to change the key

HKEY_LOCAL_MACHINE\SOFTWARE\Apache Group\Apache\X.Y.Z to the correct number if the apache.exe from modssl.org/contrib is not the same version as the previously installed one. (This seems not to be necessary with recent versions.)

Start the server, this time from the command prompt (not as a service) in order to see the error messages that prevent Apache from starting. If everything is OK, (optionally) press CTRL+C to stop the server and start it as a service if you prefer.

If it doesn't work, Apache should write meaningful messages to the screen and/or into the error.log and SSL.log files in the Apache/logs directory.

If something doesn't work, set all LogLevels to the maximum and look into the logfiles. They are very helpful.

DON'T e-mail me or the other contributors without having plain Apache installed (Step 1). We will ignore your request; we are not the Free Apache Helpdesk and there is enough good documentation on configuring Apache; if that is not enough for you, you shouldn't run a secure server anyway. Also, DON'T e-mail without having looked into the error.log and SSL.log with LogLevel set to Debug.

Debugging connect problems

Problems connecting to the server with a browser can have many reasons, many of them on the client (proxy, DNS, general IE dumbness).

So, if you encounter problems connecting with SSL, try another browser and/or look into the settings. If even this doesn't work, you can use OpenSSL to debug the problem.

bb@www$ openssl s_client -connect no-such-machine:443
gethostbyname failure 	# Error resolving this DNS name. Connect with the IP address.
connect:errno=2

bb@www$ openssl s_client -connect www1.tud.at:443

connect: Connection refused		
connect:errno=111
# No SSL server on this port. Double-check the Listen and Port directives.

bb@www$ openssl s_client -connect apcenter.apcinteractive.net:443
# everything OK. OpenSSL shows the information it obtained from the server.

CONNECTED(00000003)
depth=0 /C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
verify error:num=18:self signed certificate
verify return:1
depth=0 /C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
verify return:1
---
Certificate chain
 0 s:/C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
   i:/C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
---
Server certificate
---BEGIN CERTIFICATE---
MIIC0TCCAjoCAQAwDQYJKoZIhvcNAQEEBQAwgbAxCzAJBgNVBAYTAmF0MQ0wCwYDV
[...]
9ucXUnk=
---END CERTIFICATE---
subject=/C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
issuer=/C=at/ST=Wien/L=Wien/O=APC interactive/OU=Lifecycle Management/CN=apcenter.apcinteractive.net/[email protected]
---
No client certificate CA names sent
---
SSL handshake has read 1281 bytes and written 320 bytes
---
New, TLSv1/SSLv3, Cipher is EDH-RSA-DES-CBC3-SHA
Server public key is 1024 bit
SSL-Session:
    Protocol  : TLSv1
    Cipher    : EDH-RSA-DES-CBC3-SHA
    Session-ID: 49ACE1CF484A67D2C476B923D52110A6FCA1A7CE53D76DF7F233DEBF2333D4FB
    Session-ID-ctx:
    Master-Key: 00E9FA964253752294ECD69C18ADBA527B7170C112E2B3BCB25EA8F4FD847EC46E1FF0194EF8E16985B5E38BF6F12131
    Key-Arg   : None
    Start Time: 980696025
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
---
Enter: 
GET / HTTP/1.0
and press RETURN twice No InterWiki reference defined in properties for Wiki called 'Enter'!)
HTTP/1.1 200 OK
Date: Sun, 28 Jan 2001 15:34:58 GMT
Server: Apache/1.3.9 (Win32) mod_ssl/2.4.9 OpenSSL/0.9.4
Cache-Control: no-cache, no-store, must-revalidate, private
Expires: 0
Pragma: no-cache
X-Powered-By: PHP/4.0.4
Last-Modified: Sun, 28 Jan 2001 15:35:00 GMT
Connection: close
Content-Type: text/html

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
# the server shows its main document

Common problems

Q: I see the following when starting Apache:

Syntax error on line [some number] of ...httpd.conf
Cannot load apache/modules/mod_ssl.so into server 
(126) The module could not be found:

A: Did you copy the openssl DLLs to WINNT/SYSTEM32 (or WINDOWS/SYSTEM on Win9x/ME)?
You can verify this by copying openssl.exe into a directory of its own and executing it. If it complains about not being able to find some DLLs, then you haven't copied them into the correct directory.
One user told me that he had this problem even when he did everything right. He then found the problem: corrupt openssl DLLs. So if you get this error despite having done everything correctly, try the openssl DLLs from another version from modssl.org/contrib.

Q: I see the following when starting Apache:

Syntax error on line [some number] of apache/conf/httpd.conf:
Cannot load apache/modules/apachemodulessl.dll into server:
(127) The specified procedure could not be found:

or:

Syntax error on line [some number] of apache/conf/httpd.conf:
Invalid command 'SSLMutex', perhaps mis-spelled or defined by a module not
included in the server configuration

A: You didn't add the AddModule line (or not where it belongs, it belongs below the other AddModule lines).

Q: SSL doesn't work in the browser and I see the following in some logfile:

Fri Nov 16 15:46:30 2001 No InterWiki reference defined in properties for Wiki called 'Fri Nov 16 15'!) [error] OpenSSL: error:1407609C:SSL
routines:SSL23_GET_CLIENT_HELLO:http request [Hint: speaking HTTP to
HTTPS port!?]

A: How much clearer can an error message get? Your VirtualHost or Listen configuration is wrong.

Questions about Java servlets, OpenSSL compilation etc.

Don't ask us about installing servlet extensions, recompiling mod_ssl or Apache with EAPI, recompiled versions etc. We have no idea and won't be able help you. We are just users and not programmers.
If your needs are so special, you are better off with a Debian GNU/Linux or OpenBSD server. It will save you lots of trouble. Really.

Links

Apache Web Server: http://www.apache.org
mod_ssl: http://www.modssl.org
mod_ssl configuration: http://www.modssl.org/docs/2.4/ssl_reference.html
OpenSSL: http://www.openssl.org
PHP Hypertext preprocessor: http://www.php.net

Author of this document: Balázs Bárány (http://tud.at)
(mail me your questions, but only after having looked into the error logs with LogLevel debug. You can mail me in English, German and Hungarian.
If I am constantly ignoring your e-mail, read all the hints in the HOWTO about how to e-mail me.)

Contributor: Horst Bräuner (OpenSSL configuration on NT)
Contributor: Christoph Zich (Windows 98)
Contributor: Torsten Stanienda (Test with 1.3.12, IfDefine directive)

Contributor: Peter Holm (Listen and Port directives)

Last change: 2002-05-18

This document can be redistributed under the GNU Free Documentation License. © Balázs Bárány 1999-2002

These instructions were tested by Matt Raible on Windows XP (SP1) and Red Hat Linux 7.3 with Apache 2.0.42.